7
6
SAFETY PRECAUTIONS
SAFETY PRECAUTIONS
CARRYING & INSTALLATION
Do not store bottles, cans or other fragile items in the
unit because they may explode under -18ºC.
To ensure freshness for fruits and vegetables, do not
overload the maximum storage capacity.
maximum
capacity edge
WARNING: Keep all ventilation openings free from
obstructions.
WARNING: Do not use mechanical devices or other
means to accelerate the defrosting process other than
those recommended by the manufacturer.
WARNING: Do not operate electrical appliances
inside the appliance's food storage compartments
unless they have been recommended by the
manufacturer.
Disconnect power from the power supply and remove
all stored items before moving or transporting the
appliance to avoid accidental body injuries or
e q u i p m e n t
damage.
WARNING: Touching hot surfaces during or directly
after operation may result in burns, scalds or other
bodily injuries.
Remove all stored items inside & disconnect power
supply before moving to avoid damaging the
appliance or the risk of injuries.
Do not allow small children access to stored items in
the appliance to avoid injuries and other accidents.
Remove the flammable bottom polyfoams before
operating the appliance to avoid the risk of fire.
WARNING: Flammable refrigerant may ignite or
cause eye injuries!
Contact your Authorised Service Agent to inspect and
repair the cooling system in the event of a malfunction.
Do not attempt to
disassemble, repair or
modify the appliance
by yourself to avoid
refrigerant leakage.
Connect to potable water supply only.
Install the appliance in a dry and ventilated room.
Follow the below recommended ventilation clearance:
– from the side panels to wall:
20cm minimum.
– from the back to wall: 20cm
minimum.
– from the top to wall or ceiling:
30cm minimum.
20cm
Wall
Wall
20
cm
Do not leave the keys to lock/unlock the appliance
where young children can access it easily to prevent
children from trapped inside it accidentally.
Move the appliance carefully and avoid collisions with
people or objects.
Inspect and pack the appliance according to the
original storage positions before moving or
transporting.
Ensure an incline angle less than 45° during
moving/transportation to avoid damaging cooling
system.
Do not locate the appliance under direct sunlight or
near heat sources as doing so may increase the
power consumption
and damage the
plastic parts and
surface coatings.
Install the appliance on a flat, sturdy and horizontal
surface for a stable installation for extra safety and to
prevent excessive noise and vibrations during
operation.
Allow some minimum distance from circumferences
for good ventilation and to minimize heat radiation and
p o w e r
consumption.
Install the appliance in a dry place. Placing the
appliance in a wet or humid environment will expose it
to rust and poor insulation. This appliance is intended
for indoor use
only. Do not install
outdoors.
Remove the foam at the bottom for the appliance to
cool faster and for better mobility.
