10
11
TROUBLE SHOOTING
FAULT CAUSES REMEDIES
Failed Ignition
The regulator is not turned on. Turn off the hob and turn on the regulator.
Wrong insertion of battery. Insert the battery in correct position.
Battery is weak. Change a new battery.
Air exist in the pipe. Repeat the ignition to let out the air from
the pipe.
The rubber hose is bent. Straighten it or replace it with a new hose.
Sparker is dirty. Clean the sparker.
Distance between sparker and burner Adjust the distance between 4 – 6mm.
cap is too wide.
Burner cap and sparker are wet. Dry the burner cap and sparker with dry cloth.
Thermocouple is in wrong position. Adjust the position until the flame is heating it.
Thermocouple is dirty. Clean the thermocouple.
Sparker support is in wrong position. Adjust position of the sparker support.
Abnormal
Burner cap is in wrong position. Set the burner in correct position.
Combination
The burner is blocked. Clean the burner.
The gas pressure is incorrect. Adjust or change the gas regulator.
The nozzle is blocked. Contact a qualified technician.
Smelling Of Gas
The rubber hose is broken. Replace the rubber hose.
Rubber hose is not connected properly. Connect the rubber hose in a proper way.
Gas cooker problem. Consult authorized technician.
The burner does not ignite Ignite again after gas is cleared.
Burner Backfire
Excessive lint found in the burner Remove and clean the burner.
To Injector
mixing tube.
Excessive gas pressure. Check gas regulator pressure and adjust if
necessary.
Abnormal Flame
Excessive gas pressure. Check gas regulator pressure and adjust if
necessary.
NOTE: please contact the authorized agent or the gas supply authority service agent
immediately for any problem that cannot be rectified.
