Morello Forni RANGE FGRi, Инструкция по установке и обслуживанию

Страница: 6 / 26

RANGE FGRi MORELLO FORNI S. A. S.
6
2.2 RECEIVING OF THE OVEN
Upon receipt of an oven manufactured by “MORELLO FORNI”, it is necessary to carefully read this manual
before performing any handling or installation operation.
The oven has been designed with the utmost attention and must be handled very carefully by the carrier. All
handling operations must be performed with efficient and appropriate unloading and installation equipment.
The oven is supplied with a disassembled support base due to the extremely high center of gravity that
could cause hazards and damages during transportation.
Extract the oven from its box by removing the supports and the rods of the elements that support the woo-
den crate anchored to the oven.
The oven should be handled only with equipment suitable to support its weight.
FOR THE SAFETY OF OPERATORS, IT IS ADVISABLE TO ALLOW THIS
OPERATION TO BE PERFORMED BY QUALIFIED TECHNICIANS ONLY.
ATTENTION! THE CENTER OF GRAVITY OF THE OVEN IS SITUATED HIGH
ABOVE THE GROUND.
The metal frame of the oven is designed to be handled with a crane. The two metal bars
that form the upper frame can be used to fix the lifting slings with a hoist or crane of
adequate carrying capacity.
The metal frame of the crane is designed to be handled with many types of equipment.
The special and reinforced HANDLING AND LIFTING POINT enables the oven to be
handled and lifted with a suitable transpallet trolley or with a hoist equipped with lifting
forks, as shown in FIG.3.
THE OVEN SHOULD NEVER BE ROTATED ON ITS SIDE!
FIG.3