Morello Forni RANGE FGRi, Инструкция по установке и обслуживанию

Страница: 22 / 26

RANGE FGRi MORELLO FORNI S. A. S.
22
6.2 BURNERS COMMANDS DESCRIPTION
It is possible to activate independently the Oven two gas burners by specifi c icons switch on/off for dome
and bedplate burners.
Pressing relating icon (5) “Dome burner button”
Or (13)”Bedplate burner button”, can be enable Relating burner switch on.
Actual switch on is managed by oven thermostatic System.
When button is green, relating burner is able To function.
When button is red, relating burner is unable
To function.
Refl ecting dome or bedplate temperature, Relating burner - when enable - can start To heat automatically
the oven.
Yellow mark led is posted in the middle of icons for each burner dome and bedplate.
When light on, said led marks thermostat Intervention request based on selected temperature.
Only when enable the burner switch on
Automatically heating oven up to selected Temperature refl ected by relating monitor For dome or bedplate.
When selected temperature is reached up
Burner and relating led in the middle of Own icon switch off.
• Dome Burner: enable
• Dome Burner led: on
• Dome Burner status: ON
-------------------------------------------
• Bedplate burner: unable
• Bedplate burner led: off
• Bedplate burner status: OFF
6.3 TEMPERATURE SELECTION
It is possible to select minimum temperature for Oven dome and/or bedplate by a fi rst touch of Temperatu-
re monitor relating the dome or the Bedplate and going on pressing (+) or (-) Increasing or decreasing the
temperature As one likes.
After 5 sec. without any action relived Display records parameter.
Flashing icon (4) Dome Temp. monitor or (11) Bedplate temp. monitor showing active Change status for
captioned value.
By selected temperature for dome or bedplate, Relating burner, when enable to run, can Switch on to heat
proper area.
• Dome Burner: unable
• Dome Burner led: on
• Dome Burner status: OFF
-------------------------------------------
• Bedplate burner: unable
• Bedplate burner led: on
• Bedplate burner status: OFF
• Dome Burner: enable
• Dome Burner led: on
• Dome Burner status: ON
-------------------------------------------
• Bedplate burner: Enable
• Bedplate burner led: off
• Bedplate burner status: OFF