Morello Forni RANGE FGRi, Инструкция по установке и обслуживанию

Страница: 16 / 26

RANGE FGRi MORELLO FORNI S. A. S.
16
CHAPTER 5: INSTRUCTIONS FOR USERS
5.1 OVEN OPERATING INSTRUCTIONS
The oven can be started and used only after a qualified technician has completed its installation
and performed a regular inspection and test.
5.2 SAFETY AND CONTROL SYSTEM FOR THE OVEN GAS
The burners fitted inside the oven guarantee the utmost safety thanks to the functions of the CVI
(Combined Valve Ignition) system.
This system ensures safe starts, a continuous monitoring of the flame and the adjustment of the
gas supplied to the controlled burner.
If the burner of the crown or bedplate has been enabled by means of the related switch and the
thermostat controlling it acknowledges the selected temperature, the CVI system starts a program-
med cycle of 10 seconds, during which the electrode of the flame sensor tries to detect the flame
of the burner, which is caused by the sparking of the ignition electrode.
The gas flow to the burner is interrupted every time the CVI gas control system fails to detect a
flame during the 10 second sparking phase.
If the oven fails to ignite, the corresponding luminous red button turns on. The burner can be re-
started with this button only after an interval of 10 seconds.
During this interval of time it is not possible to restart the burner, as the 10 seconds are necessary
to recirculate the air in the combustion chamber and thus ensure a safe new start.
By the two control panel’s display temperature of the dome and bedplate can bee check by the
temperature control system which runs on burners drive directly.
Yellow leds giving feedback heach about burner status.
The bedplate burner, placed below the cooking top, is used to heat the cooking top of the oven
and maintain it at the required temperature.
The crown burner is generally installed on the internal left side of the oven. Its flame intensity can
be adjusted by means of the flame regulator, while its operation is controlled by the related ther-
mostat and by the CVI safety valve.
The users of the oven should become familiar with the instructions of this ma-
nual in order to be able to use the oven safely and without assistance. The
oven supplied has been hand manufactured with the utmost care and should
be used very carefully for a long life and full safety.
The detection and ignition electrodes are fitted on the burner by means of a
metal rod and should never be touched or hit, as this could cause the oven to
stop with the consequent need of calling a qualified technician.
The oven can be started both with the crown and bedplate burners, only if
the manual door of the oven has been completely removed from the oven
door.