2 Getting Started
2.1 Inserting the Memory Card
Insert the Mirco SD card (
max. 64GB capacity
– not included)
into the MDR while system is powered OFF. Gently push the
memory card in place until it clicks
To remove the memory card
Power off the system first, then gently push to eject the
memory card out of the slot.
Important Note:
1.Do
NOT
remove or insert the memory card when the camera is
powered on. This will corrupt the file and damage the memory
card.
2.It is recommended to use Class 10/U1 or above micro SD card.
3. Please format the micro SD card prior to the initial use.
4.Only purchase SD cards from authorized reseller to ensure
quality and performance
5.SD cards require periodic maintenance (Format) to ensure
optimal performance. SD cards can be formatted in the MDR-150.
6.Formatting SD card will erase all data, please ensure important
files are backed up prior to format
2.2 Installing in Vehicle
1. Attach the bracket to the MDR main camera. Slide it into
the bracket holder until click.
3. Before installing the bracket, please use alcohol to clean
the windshield. Wait for it to dry and press camera mount to
windshield
04
05
2. Select the location to mount the MDR. Ideally in the
center section of the windshield, below the rear view mirror.
64GB Max. capacity
– not included
4. Remove the plastic film from suction mount. Secure the
mount to windshield by firmly pressing against the glass and
lift up the tab towards the windshield to secure
