Morbark BOXER 320, Руководство оператора

Страница: 72 / 88

Routine Service and Maintenance
4.17
Annual Maintenance Procedures
Do the following procedures annually:
1. Do all Daily, Weekly, and Monthly maintenance procedures.
2.
Replace air filter** See page 4-12 , Step 3.
3. Check engine idle speed (refer to engine manual).
4.
Replace hydraulic fluid**
a. Place a suitable sized container at the right rear corner of the Boxer.
b. Remove the hydraulic tank drain plug (Item 1,
Figure 4–16 ) and drain all hydraulic fluid
from the machine.
**Make sure to inspect the O-ring (Item 2, Figure 4–16 ) on the drain plug. Replace the
O-ring if any signs of damage are noted.
Figure 4-16 Hydraulic Tank Drain Plug
c. When all of the hydraulic fluid has drained out of the tank, reinstall, and secure the drain
plug.
Make sure to dispose of the used hydraulic fluid in an appropriate manner and according to
State and Local regulations.
• The hydraulic filter will be filled with hydraulic fluid. Make sure to dispose of the used
hydraulic filter in an appropriate manner and according to State and Local regulations.
d.
Replace hydraulic filter** See page 4-9 , Step 3.
1
2
NOTICE