8
1.
Remove the screws (2) from the bottom of the steering
column opening cover (1).
2.
Using trim stick C4755 or equivalent, separate the
steering column opening cover (1) and remove.
NOTE: Steering wheel removed for clarity.
3.
Position the column tilt at the fulldownward position.
4.
Remove the two screws (4) attaching the upper
shroud (1) to the lower shroud (2). After removing
the screws, unclip the shrouds from each other by
applying hand pressure along the seams where the
shrouds connect on the sides, then remove the upper
shroud.
5.
Remove the screw (3) attaching the lower shroud (2)
to the steering column (6). Remove the lower shroud.
6.
Carefully remove the Uclip (1) from the remote start
antenna harness.
Feb 18
, 201
6
K6861211
