13
28. Slide the right stalk (2) into the groove of the SCCM
(1) and install the one retaining screw (3).
NOTE: Steering wheel removed for clarity.
29. Push the tilt lever (5) downward.
30. Install the lower shroud (2) over the tilt lever and onto
the column.
31. Position the column tilt (5) at the fullupward position.
32. Push the tilt lever (5) upward, locking it in place.
33. Install the screw (3) attaching the lower shroud (2) to
the steering column (6).
34. Position the column tilt at the fulldownward position
and lock it in place.
35. Install the upper shroud over the lower shroud, clip
ping the shrouds to one another.
36. Install the two screws (4) attaching the upper shroud
(1) to the lower shroud (2).
37. Secure the remote start harness to the I/P using the
tie wraps supplied in the kit.
38. Position the steering column opening cover (1) in
place and seat the clips fully.
39. Install the two screws (2) and tighten until secure.
Feb 18
, 201
6
K6861211
