Manual Part No: 932971-01 MD Gas Convection Oven
Page 13 of 32
Manual Rev No: 1
INSTALLATION
Important
Your attention is drawn to the
GAS SAFETY (INSTALLATION & USE) REGULATIONS 2000.
This appliance
MUST
be installed by a competent person in accordance with these and any other relevant
regulations. Users, too, should be aware of the regulations governing the use of gas appliances,
particularly with respect to the need for regular servicing.
The installation wiring of this appliance
MUST
comply with the latest I.E.E. Regulations.
WARNING: THIS APPLIANCE MUST BE ELECTRICALLY EARTHED.
This appliance must be equi-potentially earth bonded
.
Your attention is drawn to the requirement that those parts, which have been protected by the
manufacturer or his agent, are not to be adjusted by the installer.
Before Installation
Before commencing installation, remove all packaging materials from the appliance. It is suggested that
any protective film adhering to the stainless steel panels should be left on until installation is completed.
BUT THIS MUST BE REMOVED BEFORE COMMISSIONING OR OPERATING THE APPLIANCE
.
Check the appliance Data Plate (located on the back of the flue upstand/splashback panel), to ensure the
appliance is suitable for the gas supply available.
Ensure that the floor upon which the appliance is to stand is level and capable of adequately supporting
the weight of the appliance.
TO COMPENSATE FOR SOME UNEVENESS OF THE FLOOR, THE APPLIANCE
FEET ARE ADJUSTABLE.
THE FLOOR MUST BE FIREPROOF
. If it is not, or if any adjacent wall or surface is made of a combustible
material, then the installer MUST ensure that the requirements of the
LOCAL FIRE REGULATIONS
are
observed.
