10
TRUNKGUARD
®
Fieldbus
Power Supply
TPS400
CE Conformity
Installation of any MooreHawke products that carry
CE certifi cation (Commission Electrotechnique)
must
adhere to the guidelines in
Recommended
Ground
Wiring
Practices
(above)
in order to meet
the requirements set forth in applicable EMC
(Electromagnetic Compatibility) directives 2004/108/
EC, EN 61326. Consult the factory for the most
current information on products that have been CE
certifi ed.
Operation
Once confi gured, installed and supplied with the
correct power, TRUNKGUARD begins to operate
immediately.
Maintenance
Moore Industries suggests a quick check for terminal
tightness and general unit condition every 6-8
months. Always adhere to any site requirements for
programmed maintenance.
TPS400 Series modules contain no user-serviceable
parts. Non-functioning units under warranty should be
returned to Moore Industries for replacement or repair.
Moore Industries uses a combination of protection
fi nishes on our aluminum parts to eliminate the risk
of corrosion and to maintain the original appearance
of our units. The user/installer should exercise
caution with regard to possible attack by aggressive
substances in a specifi c installation.
Customer Support
If service assistance is ever required for an instrument
in your application, refer to the back cover of this
manual for the telephone numbers to MooreHawke’s
customer service department.
If possible, make a note of the model number of the
offending unit before calling. For fastest assistance,
have the following available: serial number and the
job and purchase order number under which it was
shipped
