21
Rev. 1.0
0006302011
SSM23C User Manual
+86-400-820-9661
4.1.4 LED Flashing
Clicking on this button will bring up a screen where the
LED flashing for certain warnings can be masked. Alarm
fault conditions are not allowed to be masked and will
always be indicated by the drive’s LEDs. Masking alarm
warnings only prevents the indication of the alarm by
the LEDs. The alarm warning will still be set in the Alarm
status code and in the Alarm History. See section 7 on
“Troubleshooting” below for an explanation of these
codes.
4.1.5 Drive & Revision
When SSM Quick Tuner is connected to an SSM
Integrated Motor the drive model, sub-model, and
firmware revision are automatically indicated. If working
offline (no drive is connected), the Drive model and sub-
model can be selected from the drop down lists. The
model and sub-model information is found on the label of
the SSM integrated motor.
4.1.6 Communication
When the SSM Quick Tuner is connected to an SSM
Integrated Motor the drive model and sub-model will cause
the communications to be set to RS-232. If SSM Quick Tuner
is unable to connect to the SSM Integrated Motor, manually
selecting the communications type may help establish the connection.
Port
The correct COM port may need to be selected. When the software is loaded, it looks for the first
available COM port, but may not always find the one connected to the drive. After a specific COM
port has been selected this setting is saved when the SSM Quick Tuner is closed. If the saved
COM port is available next time Quick Tuner is started it will be automatically selected
Select the port from the drop-down list. If the port exists and is not already in use, the software will
use it to communicate with the SSM.
