34
Rev. 1.0
7/31/2019
SSDC-R/C/IP Hardware Manual
3.1 Digital Inputs
3.1.1 X1, X2, X3 and X4 Digital Inputs
X1, X2: Optically isolated, differential, 5-24VDC; Minimum pulse width = 250ns, Maximum pulse frequency = 2MHz;
X3, X4: Optically isolated, differential, 5-24VDC; Minimum pulse width = 100μs, Maximum pulse frequency = 5KHz
X1 can be configured as general purpose input
X2 can be configured as general purpose input
X3 can be configured as CW limit sensor input or general purpose input
X4 can be configured as CCW limit sensor input or general purpose input
Please use StepSERVO Quick Tuner software to configure the function of X1, X2, X3 and X4.
The diagram below show how to connect the X1, X2, X3 and X4 to various commonly used devices.
Connecting a switch or relay to an input
5 - 24V
Power Supply
+
-
Switch or Relay
(Closed: logic low)
SSDC
X1/2/3/4-
X1/2/3/4+
Connecting a NPN type output to an input
5 - 24V
Power Supply
SSDC
+
-
+
-
output
NPN type
Output
X1/2/3/4+
X1/2/3/4-
Connecting a PNP type output to an input
5 - 24V
Power Supply
SSDC
+
-
+
-
output
PNP type
Output
X1/2/3/4+
X1/2/3/4-
Содержание Applied Motion Products StepSERVO SSDC Series
