14
Rev. 1.0
7/31/2019
SSDC-R/C/IP Hardware Manual
2.5 Choosing the Right COM Port
• Open the “Device Manager” on the PC. If the PC has an built-in RS-232 serial port, “Ports (COM & LPT)” (1) will be
displayed. Connect the PC and drive with the included RS-232 communication cable. Choose the connected COM(n)
port in the StepServo Quick Tuner software.
• If the PC does not have an RS-232 serial port, or has one but in using. A USB to RS-232 serial port adapter will be
needed. Open the “Device Manager” on the PC. There may or may not be a “Ports” selection. (2) Connect the adapter to
the PC, this USB adapter COM port should then be displayed. (3) Choose this new COM(n) port in the StepServo Quick
Tuner software.
Содержание Applied Motion Products StepSERVO SSDC Series
