Moomba Mobius LS, Руководство пользователя

Страница: 71 / 84

71
© 2007 Skier’s Choice, Inc.
Trailer & Towing
NOTE:
0RRPEDWUDLOHUVIHDWXUHGLVNEUDNHV7KH¿IWKZLUH
(blue) on the wire connector needs to be connected to your
vehicle’s reverse lights to be operative. This wire (blue)
provides power to a solenoid which deactivates the brakes
while in reverse. You may still tow your trailer without the
EOXHZLUHFRQQHFWHGKRZHYHU\RXPD\H[SHULHQFHGLI¿FXOW\
backing the trailer.
Connecting the Trailer
Trailer Plug Wire Schematic
:KLWH *URXQG
*UHHQ 5LJKW7XUQ%UDNH
<HOORZ /HIW7XUQ%UDNH
%URZQ 5XQQLQJ/LJKWV
%OXH 5HYHUVH/LJKWV
%()25(86(5($'$//,1)250$7,216833/,(':,7+7+(75$,/(5%<
7+(0$18)$&785(5
The following guidelines will prolong the life of the boat and trailer:
1. Always secure the boat to the trailer with tie-downs. Do not place straps around fenders or lights.
2. Always verify that the winch hook is securely in the bow eye, the strap is tight and the winch handle
locked in place before trailering.
3. Check the recommended pressure displayed on the side of the tires and assure that it is maintained.
8QGHULQÀDWHGWLUHVFRXOGFDXVHWUDLOHUVZD\DQGH[FHVVLYHWLUHZHDU
4. Verify that the trailer hitch on the tow vehicle is the proper class and size to support the tongue weight
and the trailer load.
5.
Check wheel bearing lube (Bearing Buddy®).
The trailer supplied with your Moomba model was designed
especially for the boat with your convenience in mind. Please
be sure that you have an appropriate tow vehicle before
attempting to trailer your boat. Your vehicle must be capable
RIWRZLQJ²OEVGHSHQGLQJRQWKHPRGHO
Read the trailer towing section of your vehicle owner’s
manual before towing your trailer.
$OO 0RRPED WUDLOHUV UHTXLUH D ´ EDOO DQG D ¿YH SLQ
marine grade trailer wiring connector. The standard height
from the ground to the top of the hitch ball should be about
LQFKHV:LWKWKHWUDLOHUDWWDFKHGWRWKHWRZYHKLFOHWKH
trailer should stand level.
Section XIV
Trailering Your Boat
When connecting the trailer to your tow vehicle use the
IROORZLQJSURFHGXUH
1. Raise the tongue with the trailer jack, position
WKHWUDLOHUWRQJXHGLUHFWO\RYHUWKH´EDOODQGORZHU
the jack until the tongue goes all the way down over
the
ball.
2. Press down on the latch until it locks on the ball
ZLWKD³FOLFN´
NOTICE:
,I\RXUKLWFKEDOOKDVDQH[FHVVLYHÀDWVSRWRQWRS
the latch may not engage properly. If the latch does not catch,
check with your dealer or hitch installer before trailering.
3. Insert the locking pin into the tongue. Lock pin hole is
on the side of the tongue.
4.
When all weight is off the trailer jack, pull the
jack lock pin and rotate the jack to the horizontal
position and re-lock the pin.
5.
Attach the safety cables to the tow vehicle hitch.
Cross the cables and wrap them around each
other once or possibly twice allowing just
enough slack to permit tight turns of the vehicle and
trailer.
6.
Plug the trailer lights connector to the vehicle harness.
7. Clip the brake lockout cable to the vehicle hitch.
https://www.boat-manuals.com/