Moomba Mobius LS, Руководство пользователя

Страница: 26 / 84

26
© 2007 Skier’s Choice, Inc.
Bilge Area Drain Plug
The bilge area drain plug is located at the front of the motor
well, in the center under the engine.
It is extremely important that the drain plug is always
checked before starting the engine. The drain plug should
be secured in place using a wrench.
NOTE: Not all Moomba models have center drains.
DO NOT start engine until center drain plug is checked
and secured in place. DO NOT try to install center drain
plug while engine is running.
Some Moomba models DO NOT have mechanical
devices to hold the motor box cover in the open
position. Please use caution to prevent accidental
closing.
Rear Drain Plug (if applicable)
The rear drain plug is located at the back of the boat, near
the bottom of the transom. It is extremely important that the
drain plug is always checked before starting the engine. The
drain plug should be secured in place using a wrench.
DO NOT start the engine until the drain plug is checked
and secured in place.
DO NOT try to install the drain plug while the engine
is running!
Throttle Lever
The throttle lever controls both the throttle and the
transmission. The idle position (normally vertical) is the
zero throttle position and the neutral position for the
transmission. A safety ring (umbrella) keeps the lever from
being accidentally moved to engage the transmission.
To place the transmission into gear, with your hand placed
over the lever ball, pull up on the safety ring (umbrella) and
slowly push the lever into forward gear or slowly pull the
lever back into reverse gear.
1HYHU VKLIW WKH OHYHU GLUHFWO\ IURP WKH QHXWUDO YHUWLFDO
position into a speed position.
- To prevent damage to the transmission always
allow the transmission time to engage before
accelerating the engine.
- Once the transmission is engaged, you may accelerate
as quickly as you like.
The Transmission Lockout button allows the transmission to
be disengaged while giving the throttle full operating range.
With the lever in the idle position (normally vertical) push
the button located at the bottom of the lever to disengage
the transmission. The throttle may then be operated in
any open position (forward of neutral or back of neutral
upright position). Return the throttle to idle position, and
the transmission lockout will automatically reengage the
transmission in neutral position.
Transmission
Lockout
Button
https://www.boat-manuals.com/