Moomba Mobius LS, Руководство пользователя

Страница: 44 / 84

44
© 2007 Skier’s Choice, Inc.
Style 1
To Lower Cage for Storage:
7RROVUHTXLUHG´$OOHQZUHQFKIRUVWDLQOHVVVWHHO
;´$OOHQKHDGEROW
/RRVHQEXW'2127UHPRYHIURQWOHJDOOHQEROWV
- Loosen and remove the hand-knob bolts that connect
the rear legs to the feet.
- Place the hand-knob bolts somewhere for safe storage.
- While standing in the bow area, pull the cage forward,
gently placing it against the bow of the boat.
Place padding between the cage and the boat to protect
the gel coat.
Rad-A-Cage
The Mobius models are equipped with a
Moomba Rad-A-Cage towing tower. The
cage is designed as a stable tower to
enhance wakeboarding. It is NOT intended
to be used to tow skiers, barefooters, or
multiple wakeboarders. Such use will void
any warranties written or implied.
Be sure that all bolts are tightly in place
before use.
Be aware of and avoid low overhead
REMHFWV VXFK DV EULGJHV SRZHU OLQHV
RYHUKDQJLQJWUHHVHWF
To Raise Cage:
- Lift and rock the tower back into place until the rear
legs align with the rear feet. (Some manipulation of the
cage may be required to get the legs to line up with the
feet.)
- Install and tighten the rear head-knob bolts
- Tighten the front leg’s allen bolts.
The threads in the aluminum foot could be damaged if
the bolts are not aligned and threaded correctly.
The Rad-A-Cage is designed to pull single (1)
ZDNHERDUGHUWULFNVNLHURUNQHHERDUGHU
Style 2
To Lower Cage for Storage:
- Remove the four hand knobs from the top of the rear
leg. While holding the tower up, lower the side legs.
Then lower the tower downward into the boat.
To Raise Cage:
- Lift the tower and swing up the rear legs. Install the four
hand knobs.
The threads in the aluminum foot could be damaged if
the bolts are not aligned and threaded correctly.
The Rad-A-Cage is designed to pull single (1)
ZDNHERDUGHUWULFNVNLHURUNQHHERDUGHU
NOTE: Apply a thin coat of anti-seize to the threads of
the hand knobs periodically.
https://www.boat-manuals.com/