Moog MINIMOOG MODEL D, Руководство пользователя

Страница: 35 / 84

35 | Top Patch Panel
MIDI PORTS
MIDI IN
Minimoog Model D can receive MIDI Note,
Velocity, and Pitch Bend information. It now
includes mod-wheel MIDI support: CC #1
(MSB or Most Significant Byte) and CC #33
(LSB or Least Significant Byte).
MIDI THRU
This jack rebroadcasts the signal arriving at
the
MIDI IN jack and passes it along to other
MIDI equipment.
MIDI OUT
Minimoog Model D can send MIDI Note,
Velocity, and Pitch Bend information Mod
Wheel information, as well as Aftertouch.
CONTROL OUTPUTS
AFTER PRESSURE OUT (AFTERTOUCH)
This jack sends a 0 to +5V control voltage signal based on the After Pressure that
is generated by pressing down further on a key that is already being held down on
the keyboard. There is a small trimpot located adjacent to this jack that is used for
attenuating the level of the After Pressure control voltage signal.
PITCH OUT
This jack sends a 1V/Octave control voltage signal based on the Pitch of the note being
played on the keyboard summed with the output of the
PITCH Wheel. The default
setting is for the key C0 to generate zero volts; however, this note is not accessible
from the keyboard itself. Using the Pitch CV Zero Volt Power On Command (Global
Settings), you can specify a particular key to have a control voltage value of zero volts.
While not a modular synthesizer, Minimoog Model D features an enhanced Patch Panel to
interface with other analog synthesizers and musical equipment via Control Voltage, Trigger
signals, and MIDI. This Patch Panel also expands the expressive performance capabilities of
Minimoog Model D itself. The Patch Panel is located along the top edge of the synthesizer.