Moog MINIMOOG MODEL D, Руководство пользователя

Страница: 81 / 84

81 | Specifications
CONTROL VOLTAGE OUTPUTS
After Pressure (Aftertouch): 1/4” TS
0 to +5 volts with user adjustable trimpot
Pitch: 1/4” TS
-3 volts to +7 volts. C1=1 volt
Gate: 1/4” TS
0 to +5 volts
Velocity: 1/4” TS
Global selection of either 0 to +5Volts or 0-10volts.
Manual attenuation with trimpot.
CONTROL VOLTAGE INPUTS
Loudness: 1/4” TRS 0 to +5 volts; +5 volts = Unity
Gain Ring connector allows pedal control via Moog
EP-3 Expression Pedal
Filter (Cutoff Frequency): 1/4” TRS 1 volt per octave
of change Ring connector allows pedal control via
Moog EP-3 Expression Pedal
Oscillators (Pitch): 1/4” TRS 1 volt per octave of
change Ring connector allows pedal control via
Moog EP-3 Expression Pedal
Modulation Source: 1/4” TRS Ring=Noise Send;
Tip=Modulation Receive (This jack makes a
normalled connection with no cable present.)
Trigger: +5 volt V-Trigger; 1/4” TS Activates both
Contour Generators
MIDI JACKS (5-PIN DIN STYLE)
MIDI In: Note On (Trigger), Note #, Velocity, Pitch
Bend, and Mod Wheel
MIDI Out: Note On (Trigger), Note #, Velocity,
Aftertouch, Pitch Bend, and Mod Wheel
MIDI Thru: Mirror of the MIDI In signal
POWER SUPPLY
Self-switching external supply; 100–240 volts;
50/60Hz; <12 Watt nominal consumption. Locking
XLR-4 connector
Specifications