Moog MINIMOOG MODEL D, Руководство пользователя

Страница: 41 / 84

CREATING FM EFFECTS
Often when we think of Modulation, we are thinking of adding a slow, cyclic change
in pitch, filter brightness, etc. Minimoog Model D also allows one audio oscillator to
modulate another, creating interesting Frequency Modulation effects.
STEP 1
Set the OSCILLATOR MODULATION rocker switch to ON to enable
frequency modulation of the Oscillators via the modulation bus.
STEP 2
Set OSCILLATOR–1 to the 16’ or 8’ Range.
STEP 3
Set
OSCILLATOR–3
to the
16’
or
8’
Range.
STEP 4
Isolate OSCILLATOR–3 from keyboard control by setting the
orange
OSC. 3 CONTROL
rocker switch to
OFF.
STEP 5
In the CONTROLLERS section, set the black OSC. 3/FILTER EG
rocker switch to
OSC. 3
and rotate the
MODULATION MIX
knob
fully counterclockwise.
STEP 6
Turn off all audio sources to the
MIXER
panel—except
OSCILLATOR–1 —using the blue rocker switches.
STEP 7
Hold any note on the keyboard, and use the
MODULATION
Wheel to apply Frequency
Modulation to Oscillator–1 using Oscillator–3. The FM effect can be controlled by the
position of the Modulation Wheel, as well as the Range, Frequency, and Waveform
settings of Oscillator–3.
41 | Performance Tips & Techniques
Performance Tips & Techniques