V1.2.0 RELEASE NOTES
(Continued)
Global Parameters
Group 4
Group Select
Key
Parameter
Select Key
Sync Enable
Button Blinks
4.9 MIDI OUT Filter - Pitch/Mod Wheels
G#2
G#1
4 x / 9 x
C0
= off,
D0
= on (default). This setting controls whether or not MIDI CC messages are output in response to movement of the
Pitch Wheel or Mod Wheel. ON is the setting that allows messages to be sent.
4.10 MIDI OUT Filter – Keys
G#2
A#1
4 x / 10 x
C0
= off,
D0
= on (default). This setting controls whether or not MIDI Note messages are output in response to playing on the
Grandmother keyboard. ON is the setting that allows MIDI notes to be sent.
Global Parameters
Group 5
Group Select
Key
Parameter
Select Key
Sync Enable
Button Blinks
5.1 ARP/SEQ CV OUT Mirrors KB CV
A#2
C#0
5 x / 1 x
C0
= off (default),
D0
= on. This setting allows the
CV OUT
,
GATE OUT
, and
VEL OUT
jacks in the ARP/SEQ section of the panel
to reflect the KB CV OUT, KB GATE OUT, and KB VEL OUT signals any time the Arp/Sequencer is not running.
NOTE:
Tuning scales are imported into Matriarch via MIDI, and can be sent from tuning software such as Scala,
or the Moog Phatty Tuner. Matriarch supports the following MIDI TUNING STANDARD message types:
· Bulk Tuning Dump (128-note scales)
· Single-Note Tuning (retunes notes individually)
· Scale/Octave Types 5, 6, 8, 9 – 1-Byte and 2-Byte formats.
The official MIDI Tuning Standard description is part of The Complete MIDI 1.0 Detailed Specification PDF document, available
free of charge at www.midi.org. You will be required to register at the site in order to access this document, and other information
related to MIDI.
