V1.2.0 RELEASE NOTES
(Continued)
Global Parameters
Default Group (Group 0)
Group Select
Key
Parameter
Select Key
Sync Enable
Button Blinks
0.8 Noise Filter Cutoff
(none)
F#1
8 x
Matriarch uses a 1-pole high-pass filter (VCF) to control the tonality and coloration of the analog Noise generator. Low-end content is
removed as the filter cutoff frequency is increased. Use any of the white keys to set the cutoff frequency of the Noise Filter, from
lowest (
C0
) to highest (
C4
). The Default is the lowest setting (
C0
).
0.9 Delay Filter Brightness
(none)
G#1
9 x
The output of the Stereo Delay can be set to either a Bright tone or a Dark tone.
Use the lowest two white keys to select Dark (
C0
), or Bright (
D0
). The Default is Bright (
D0
).
0.10 Delay Sync CV Bend
(none)
A#1
10 x
The Delay Sync CV Bend parameter sets the behavior of the
TIME CV
inputs when the Delay is synchronized to internal or
external clock. With Delay CV Sync Bend On, the
TIME CV
inputs “bend” the Delay Time relative to its currently synchronized
tempo, up to plus-or-minus 33%. This can be useful for adding choral motion or warble to synchronized Delay effects. With
Delay CV Sync Bend Off, the
TIME CV
inputs work identically to the front-panel
TIME
and
SPACING
knobs, selecting tempo-
synced clock divisions of the of the currently synchronized tempo. Use the lowest two white keys to select OFF (
C0
), or ON
(
D0
). The Default is OFF.
Global Parameters
Group 1
Group Select
Key
Parameter
Select Key
Sync Enable
Button Blinks
1.1 MIDI Input Channel
C#2
C#0
1 x / 1 x
Matriarch can send and receive data on any MIDI Channel, from 1 to 16. Use the first 16 white keys (
C0
to
D2
) to select the
corresponding MIDI Input Channel (1 to 16).
1.2 MIDI Output Channel
C#2
D#0
1 x / 2 x
Matriarch can send and receive data on any MIDI Channel, from 1 to 16. Use the first 16 white keys (
C0
to
D2
) to select the
corresponding MIDI output channel (1 to 16).
1.3 MIDI Echo (USB)
C#2
F#0
1 x / 3 x
MIDI Echo USB allows MIDI data received at the
USB MIDI
input to be re-transmitted via the
USB MIDI
output,
the
DIN MIDI
output, or both. Use the first four white keys to select OFF (
C0
), DIN OUTPUT (
D0
), USB OUTPUT (
E0
), or DIN &
USB OUTPUTS (
F0
). The default is OFF (
C0
).
1.4 MIDI Echo (DIN)
C#2
G#0
1 x / 4 x
MIDI Echo DIN allows MIDI data received at the
DIN MIDI
input to be re-transmitted via the
DIN MIDI
output, the
USB MIDI
output, or both. Use the first four white keys to select OFF (
C0
), DIN OUTPUT (
D0
), USB OUTPUT (
E0
), or DIN & USB OUTPUTS
(
F0
). The default is OFF (
C0
).
