ISA 1
Mounting
Rev. -, April 2019
5
The operating mode and addressing can be set via the DIP switch (Fig.
2/2) and the operat-
ing mode selector switch (Fig.
2/6).
3.2
Operating principle
The pinion shaft transmits a torque to the driving element of the sliding system. The trans-
mission can take place e.g. to a toothed belt drive via a toothed pulley (optional).
4
Mounting
4.1
Scope of delivery
Fig. 3
Scope of delivery
1 Patch cable with RJ45 plug connector
(optional)
2 Pluggable terminal block WAGO
713-1104/037-000 (2 ea.)
3 Sliding system drive
4 Toothed pulley (optional)
5 Mains cable (optional)
