Generalities
ISA 1
2
Rev. -, April 2019
1
Generalities
Compliance with these operating instructions is required for safe use and smooth opera-
tion of the sliding system drive. Only persons who have read and understood these operat-
ing instructions are allowed to work with and on the sliding system drive.
2
Safety
2.1
Intended use
The sliding system drive is intended for stationary mounting on sliding systems. The sliding
system drive may only be used for safety functions if it is integrated into a higher-level
safety system. The sliding system drive may only be used indoors and within the value
range defined in the performance data.
Any other use than that described is not considered the intended use. The manufacturer
shall not be held responsible for any personal injury or damage to property resulting from
improper use.
2.2
Target group
These operating instructions are intended for the qualified personnel of the manufacturers
of motor-operated sliding systems.
2.3
Safety regulations
The sliding system drive has been built on the basis of applicable regulations, laws and
standards and, thus, corresponds to the technical state of the art. During operation, how-
ever, residual risks may arise or impairments of the equipment may occur.
The safety regulations and warnings in these operating instructions must be complied with
to prevent any possible residual risks.
2.3.1
Generalities
•
These operating instructions must have been read and understood prior to mounting,
commissioning, and utilisation of the sliding system drive.
•
Comply with the general and national safety and accident prevention regulations.
•
Keep these operating instructions during the life-cycle of the sliding system drive and
pass them on to subsequent users.
•
Disconnect the sliding system drive from the power supply prior to any work.
