5.6 Storage
The device contains plastic elements whose prop-
erties can be changed by environmental influences
such as oxygen, ozone, heat, humidity, light, UV
rays and solvents.
Store the device under the following conditions:
n
Do not store near heating bodies or other
sources of heat.
n
Do not store in the same room with solvents,
chemicals, acids, fuels, disinfectants or similar
substances.
n
Not in proximity to fluorescent light sources,
mercury vapour lamps, light sources, electric
motors or devices which can generate sparks
or an ozone charge due to other electrical dis-
charges.
n
Do not subject to direct sunlight or open
installed fluorescent tubes which could gen-
erate a UV load.
n
Do not place on copper, brass or rusty steel.
n
Store dry and dust-free.
n
If possible, store in air and light-resistant orig-
inal packaging and only unpack shortly before
use.
n
Storage temperature: 5 to 25
℃
n
Relative humidity: 65 %
n
Spare seals: Store voltage-free, do not bend,
fold, knick, hang on hooks or expose to pres-
sure loads.
n
Maximum storage time: 12 months After that,
send back to manufacturer for inspection.
Under some circumstances, there are
notes about storage on the packaging
pieces which exceed the requirements
named here. Adhere to these accordingly.
6 Installation and initial com-
missioning
6.1 Safety instructions
WARNING!
Risk of injury from missing media line
connections!
Media may leak if connections are made
incorrectly. Contact with the leaked media
can cause serious injuries.
– Connect the media and leak connec-
tions properly to the corresponding
supply aggregates.
– Adhere to the engraved markings for
the connection bores on the housing
and clearly identify the connections
using the information in the drawings
included with delivery.
CAUTION!
Risk of crushing from the dead weight
of the component!
If the device falls down during assembly, it
can crush hands or feet due to its weight.
– Handle the device carefully. Do not let
it fall. If necessary, secure it with a suit-
able hoisting device.
– Wear safety shoes.
Rotostat • Operating instructions
19
