background image

Use the formula below to select the correct power supply for cameras connected in parallel (positive to positive, negative to negative):

Total current for a 24 VAC system:
TOTAL CURRENT = (202mA x total number of cameras)   Example: 202mA x 5 total cameras = 1010mA
                                  Note: 202mA is camera plus power supply

CAMERAS             VOLTAGE                CURRENT             POWER

        1              24 VAC/VDC                 102mA               2.5W

        2              24 VAC/VDC                 210mA               5W

        3              24 VAC/VDC                 331mA               7.9W

        4              24 VAC/VDC                 487mA               10.9W

CABLE AND POWER GUIDELINES

This chart shows the proper current needed for power supplies for Q-View Series cameras. Use Class 2 Power only. Input voltage must be 
24 VAC/VDC.

Power Supply Cable Maximum Length (feet/meters)

CAMERAS               TOTAL LOAD           POWER SUPPLY             24 AWG                 22 AWG                 18 AWG            16 AWG
        1                   2.5W                           24 VAC/VDC               1718/523               2733/833             6909/2106       10985/3348
        2                   5W                              24 VAC/VC                  834/254               1327/404              3356/1023         5335/1626
        3                   7.9W                           24 VAC/VDC                529/161                842/256                2129/649         3385/1032
        4                   10.9W                         24 VAC/VDC                359/109                572/174                1447/441          2300/701

NOTE:

 The above table is based on a "worst-case" power supply. Using a regulated or switching power supply can increase your cable distance. Moog Videolarm recommends 

using our PS24 power supply, or a CSA/UL listed Class 2 power supply.

Video Cable Maximum Length (feet/meters)

Cable Type                 RG-59                  RG-6               RG-11
Wire Gauge               23 AWG*            18 AWG*           16 AWG*
 Max. Length            750/229            1500/457         2000/610

* Copper clad steel core, 95% braided shield

AWG               250/76             500/152             1000/305              1500/457              2000/610          3000/914
  18                   3Ω                     6Ω                     13Ω                       19Ω                      26Ω                   40Ω
  20                   5Ω                   10Ω                     20Ω                       30Ω                      40Ω                   59Ω
  22                   8Ω                   17Ω                     33Ω                       48Ω                      66Ω                   99Ω
  24                  13Ω                  26Ω                     52Ω                       78Ω                    108Ω                 163Ω          

Maximum Length (feet/meters)

Содержание QOD SERIES













Отзывы: