background image

the trailer for road transport

   e: [email protected]  |  w: www.montracon.com

   

t

: +44 (0)1302 732500  |  

f

: +44 (0)1302 732503

MACHINERY CARRIERS

7

Axles
Suspension
Brakes
Disc Caliper/Roter
Spring Brake-(Brake chamber)
All ABS/EBS Sensors
Hub

Autoslacks
Airbag

Shock Absorber

Valve
ECU
Raise/Lower Valve
Park/Shunt Valve

Timber Floor
Chassis Construction
Valves
Electrics
Landing Legs
Paint (2 Pack)

Winch

ECO
ECO

ECO - This item must be 
registered with BPW by 
the operator - ECO PLUS 

BPW
ECO MAX
ECO PLUS
ECO MAX

3
3
N/A
1
2
1
3

2
1
2
2

2
3
3
3

2
1
1
3
1

Years Months

36
36
N/A
12
24
12
36

24
12
24
24

24
36
36
36

3
24
12
12
36
12

BPW AXLES

HALDEX BRAKING SYSTEMS

ANCILLARY EQUIPMENT

TERMS AND CONDITIONS

If the trailer is found to be defective within the warranty 
period due to faulty materials or workmanship, then the 
defective part(s) will be repaired or replaced without 
charge for parts or labour subject to the following 
conditions:-

1. The work must be carried out by an authorised 
Montracon representative/repair agent.

2. The trailer must not have been neglected, misused or 
modified. Model designation and serial number 
plates/stampings must be intact.

3. The trailer must have been serviced as recommended 
in the Operator Handbook using only replacement parts, 
lubricants and fluids approved by Montracon. Suitable 
service records should be maintained at the owner's 
premises as evidence a specific service has been 
undertaken. 

4. This warranty does not apply to those proprietary items 
whose manufacturers have their own Warranty Policy, e.g. 
Tyres, Axles, Braking Systems - refer to appropriate 
proprietary warranty policies for their warranty terms and 
conditions.

5. For more details of the company's warranty terms refer 
to the 'business terms' which form part of the purchase 
contract.

The warranty given on this trailer is expressly in lieu of 
and excludes (to the fullest extent permitted by Law) all 
other representations, conditions, guarantees or 
warranties expressed or implied. It shall be governed by 
UK Laws and all claimants under this warranty shall 
submit to the exclusive jurisdiction of the Courts of the UK. 

Montracon reserves the right to update or change working 
policies, procedures and operating systems at any time. 

WARRANTY PERIODS

(Bulbs Not Warrantable)
MODUL
Any damage must be 
repaired by a suitably 
qualified person. The 
trailer should be cleaned
regularly and maintained 
to a suitable standard.
(Terms & Conditions apply)

Refer to 
Winch 
Manufacturer

Содержание MT45











































































Отзывы: