the trailer for road transport
e: [email protected] | w: www.montracon.com
t
: +44 (0)1302 732500 |
f
: +44 (0)1302 732503
MACHINERY CARRIERS
51
RECOMMENDED PREVENTATIVE MAINTENANCE SCHEDULE (cont)
Check electrical system for correct functionality
Inspect electrical cables for damage & security
Inspect ancillary equipment for security
Grease, inspect & check for security: Support legs
Steelwork & finished surfaces
Fifth wheel
Check identification plates
Rubbing plate & king pin
Inspect for security & corrosion:
Winch (as applicable). Periodically check tightness of the mounting bolts
and electrical connections.
Remove all dirt and corrosion and always keep clean.
A
B
C
D
E
F
*Linish is a pattern of very fine lines achieved by abrading
the surface with by hand using suitable paper on the
brake linings and emery cloth on the drum. The pattern
should be in two directions each at 45 degrees across the
surface to give a cross hatched effect. Do not use hand
or power tools.
** Refer to manufacturers manual
*** For all torques and other information please refer to
‘Suspension: Checks & Torque Figures’ on page 59.
Check ride height
Inspect neck ramp pivot points & locking pins
Grease / oil rear ramp pivot points
Grease neck ramp support pins
Check lift axle components (if fitted)
Check condition of chrome to hydraulic cylinders
Check condition of winch wander lead & radio remote control
Check condition and operation of winch according to manufacturers instruction
