the trailer for road transport
e: [email protected] | w: www.montracon.com
t
: +44 (0)1302 732500 |
f
: +44 (0)1302 732503
GENERAL INFORMATION
MASTER FUSE
MACHINERY CARRIERS
43
The electrical system is of the insulated return type,
utilising two 7-pin connectors wired in accordance with
ISO 1185 and ISO 3731 configuration.
An ISO 7638 connector will be fitted for ABS or EBS
dedicated power (see 'Section 4 Braking System').
Compatibility between tractor and trailer electrical
connections should always be checked to ensure correct
functioning of individual circuits. Just because the plug
and socket may easily mate is not an indication of
compatibility. Alternative systems may be fitted to
customer's requirements. On occasions additional
connectors may be fitted for auxiliary equipment, e.g.
inspection lamps, removable lighting panel and winches,
or to control independent circuits like tail lifts, internal
lifts/decks and rear loading ramps.
Electrical Equipment
Outline markers and internal lighting are connected with
rear light terminals in the junction box. Normally the
switch for the internal lighting is located on the left, at the
rear chassis cross-member.
Wiring of outline markers and internal lighting is routed
from the junction box through ducting and Bundy tubing
via the front/rear & roof.
To ensure the serviceability of equipment, check that:
a) The electrical connector(s) are correctly located and
secure.
b) The wiring is properly insulated and secured.
c) All lights, reflectors and marker boards are secure,
clean and functioning.
d) Damaged lens, bulbs, reflectors etc. are replaced.
e) When ABS is fitted, the anti-lock warning lamp is
functioning correctly.
The power pack and winch (if fitted) circuit(s) are
protected by a 200 amp Master Fuse which is
located on near-side front neck area.
TYPE: 0-376-20
SIZE: 200 amp
COLOUR: Blue
PART NO: 52030512
