the trailer for road transport
e: [email protected] | w: www.montracon.com
t
: +44 (0)1302 732500 |
f
: +44 (0)1302 732503
NOTE:
To operate lever, push in and turn to required
position as outlined above. Always return lever to central
position and pull the lever OUT before driving away.
NOTE:
There is a Reset-to-Ride facility incorporated in
the raise/lower system. It will ‘pop’ the button OUT in all
instances as a fail safe.
MACHINERY CARRIERS
STANDARD RAISE/LOWER VALVE
WARNING:
Do not operate height control valve when:
Trailer is uncoupled.
Trailer brakes are applied.
Always leave a parked trailer with the suspension
lowered.
1. Push control lever handle IN.
2. Set control to either RAISE or LOWER position. When
trailer floor reaches the required level (or maximum
allowable) set the control back to the centre position.
1. Ensure control is set in central position.
2. Pull lever out to reset suspension.
1. Push the control lever FULLY in. This allows the
operator to walk away whilst the suspension dumps.
To RESET the suspension to the running (RIDE) height
To ‘DUMP’ the suspension
To RAISE or LOWER the suspension
The raise/lower valve allows lifting/lowering of the trailer
bed by pressurising/depressurising the air suspension
bellows.
31
3
