background image

EN 5

DETERGENTS AND ADDITIVES 

 Keep detergents and additives in a safe, dry 

place out of the reach of children.

 Do not use any solvents (e.g. turpentine, 

benzene); do not machine wash fabrics that 

have been treated with solvents or flammable 

liquids.

Only use detergents and/or additives that are 

specifically produced for domestic washing 

machines. Observe the recommendations on the 

care labels of your laundry.

The choice of detergent depends on:

• 

Type of fabric

• 

Colour 

• 

Recommended wash temperature

• 

Degree and type of soiling

Laundry type

Kind of detergent

White robust laundry 

(cold-95°C):

heavy duty detergents with 

bleach

White delicate laundry 

(cold-40°C):

mild detergents with bleach 

and/or optical brighteners

Light /pastel- shaded 

colours (cold-60°C):

detergents with bleach and/

or optical brighteners

Intensive colours 

(cold-60°C):

colour detergents without 

bleach/optical brighteners

Black/dark 

colours(cold-60°C):

special detergents for black/

dark laundry

For laundry requiring special treatment (e.g. wool 

or microfibers), we recommend to use specialized 

detergents, additives or pre-treatment available on the 

market.

 

Refer to internet link 

www.cleanright.eu

 for more 

detailed information.

Do not use liquid detergent for the main wash 

when having activated the “Prewash” option.

Do not use liquid detergent when selecting a later 

cycle start / cycle end (depending on the

model).

Dosage

Follow the dosage recommendations on the detergent 

pack. They depend on:

• 

degree and type of soiling

• 

size of wash

 

-

full load: follow the detergent manufacturer’s 

instructions;

 

-

half load: 3/4 the amount used for a full load;

 

-

minimum load (about 1 kg): half the amount used 

for a full load;

If there is no reference to a certain wash load on 

the detergent pack: the detergent manufacturers 

usually refer their dosing recommendations to 4.5 

kg laundry for heavy duty detergent and 2.5 kg 

laundry for delicate detergent.

• 

water hardness in your area (ask for information 

from your water company). Soft water requires less 

detergent than hard water. 

Please note:

Too much detergent can result in excess foam 

formation, which reduces washing efficiency. If the 

washing machine detects too much foam, it may 

prevent spinning, or prolong the programme duration 

and increase the water consumption (see also 

remarks on foam formation in the “Troubleshooting 

Guide”). Insufficient detergent may result in grey 

laundry and also calcifies the heating system, drum 

and hoses.

Where to put detergents and additives 

(pict.

 2

)

 Prewash chamber

• 

Detergent for the prewash phase (only if you 

have activated “prewash” option)

 Main wash chamber

• 

Detergent for the main wash phase (must be 

added for all wash programmes)

• 

Additive for stain removal (optional)

• 

Water softener (optional; recommendable for 

water hardness class 4 or more)

 Softener chamber

• 

Fabric softener (optional)

• 

Starch dissolved in water (optional)

Do not exceed the “MAX” level mark when filling in 

detergent, additives or softener.

If you use liquid detergent, close the dispenser 

right 

after having filled in the detergent.

For more information regarding the application of 

detergent and fabric softener in the programmes, 

have a look at the separate program chart.

Using chlorine bleach 

• 

Wash your laundry in the desired programme  

(Cotton, Synthetics), adding an appropriate amount 

of chlorine bleach to the SOFTENER chamber 

(close the lid carefully).

• 

Immediately after end of programme, start the 

“Rinse and Spin” programme to eliminate any 

residual bleach smell; if you want, you can add 

softener.

• 

Never put both chlorine bleach and softener into 

the softener chamber at the same time.

• 

Prefer to use bleaches on oxygen basis; in this 

case follow the instructions of the manufa

cturer.

Using starch powder

• 

Select the “Rinse and Spin” programme and check 

that the spin speed is adjusted to not more than 

800 rpm.

• 

Start the programme, pull out the detergent dis-

penser so that you can see approximately 3 cm of 

the softener chamber.

• 

Pour the starch solution prepared into the softener 

chamber while the water is running into the deter-

gent dispenser.

Содержание MWBI6012

















Отзывы: