Montiss CVH5743M, Руководство пользователя

Страница: 20 / 62

Using the hand vacuum only
-
To remove the cleaner from the base press the lever at the rear and lift the handle.
-
Certain tasks may require the use of the nozzle or brush attachments. These tools are
stored in the base unit (Fig. 3, 4 and 5)
Guidelines for cleaning your mattress and/or bed
-
In order for the UV-C light to be fully effective against dust mite and bacteria, it is important
that the area is exposed to UV-C light for adequate time. Please adhere to the following
guidelines.
1. It is best to start in one corner of the bed.
2.
Press the unit flat against the mattress.
3. In order for the UV-C light to activate, all sensors must be placed on the mattress.
4.
Ensure the unit is moved in a smooth and steady motion.
5. TO ensure every part of the mattress is covered follow a set plan such as detailed in
diagrams A and B.
6. With double beds it is advised to clean one side at a time.
7. Move the UV-C vacuum at a speed less than 20 seconds per meter and repeat 3 times.
8.
It is advisable, to clean both sides of the mattress, if possible.
9. We suggest a similar method for bedding such as duvets and pillows.
10. Used Mattresses – It is best to clean on a daily basis for the first 7 days and than once
a month thereafter.
New Mattresses
– it will be sufficient to clean once a month only.
11. If cleaning carpets follow a similar method.
CARE AND MAINTENANCE
Dust container and filter
-
Allergy sufferers – When emptying any vacuum cleaner it is difficult to avoid exposure to
dust. To minimize this risk of exposure please ensure that you encase the dust container in
a large bag to empty it and close the bag as tightly as possible round the container. Remove
the container and close the bag as tightly and quickly as possible and dispose of this
immediately. It is advisable to wear disposable clothes and a face mask while emptying the
cleaner. If at all possible, ask a non allergy sufferer to empty the dust container when
required.
19