18
Floor brush (21)
The floor brush is supplied with a separate floor brush connector (20). To use the floor brush, push
the floor brush connector in the rear side of the floor brush and turn it 180 degrees upward as
shown in figure 3. The floor brush is now fully assembled. The floor brush is suitable for the
cleaning of floor areas and large washable walls. The floor brush can be used with or without the
cleaning cloth (15). It is recommended to use the floor brush without the cloth for disinfecting and
refreshing carpets while the cleaning cloth needs to be used for the cleaning of all smooth floors. To
clean very dirty areas, move the floor brush over the surface slowly in order to increase the
cleaning action of the steam.
Note: the device is not suitable for cleaning unsealed wooden floors, soft plastics or wooden
furniture.
Figure 3
Cleaning cloth (15)
Place the floor brush (21) on top of the cleaning cloth and pull the cloth under the clips on each
side of the brush as shown in figure 4. The cleaning effect of the cleaning cloth can be improved by
turning and changing the cloth regularly. To clean very dirty areas, move the floor brush over the
surface slowly in order to increase the cleaning action of the steam.
Figure 4
Accessory adaptor (16)
Slide the adaptor onto the nozzle of the steam jet (9) until it clicks into place. The adaptor can be
used with various accessories such as the small brush (17), large brush (18), concentrator nozzle (19)
and window squeegee (22).
To attach the accessory adaptor to the steam jet, push until it clicks into place as shown in Figure 5.
Figure 5
