27
Installation
XG0225 - 170223
STEP 8:
Log #3 is placed just in front of the burner in the middle of
the tray.
STEP 9:
Log #5 rests across logs #3 and #2, crossing over the
burner.
STEP 12:
The second log #5 rests on log B and crosses over the
burner.
STEP 10:
Log #4 leans on the top of log A, with the other end resting
on the other side of the burner
STEP 13:
The second log #1 is placed parallel to the burner and in
front of log B.
STEP 11:
#6 rests against log #4 in front of the burner
Figure 12.j
Figure 12.k
Figure 12.n
Figure 12.l
Figure 12.o
Figure 12.p
Figure 12.m
2
5
5
4
1
4
6
3
Note: It is normal to see some soot build-up on logs that cross the flame. Soot should not build up enough to form balls.
Adjust logs away from flame as necessary if this occurs.
