28
Installation
XG0225 - 170223
Optional Log Set - R820
The Fireplace has the option of installing a drift wood log set. Once the base media of fireglass, firestones, or speckled stones has been placed
the log set can be installed. Ensure logs are securely placed and will not tip or fall.
Log Kit Installation
Log kits used to create sequence shown: 3 LGS58, 1 LGS57
LGS57
LGS58
A
B
C
D
E
F
Place each log in the location shown in figure 13b. Use the panel
joints as reference. The logs should be behind the burner ports
and leaning against the panel.
The log placed on the right should be orientated in the same
direction to the left log.
STEP 2:
Place Log B behind the burner port next to the right log of
LGS57. See figure 13f.
STEP 3:
Place log C from the LGS58 kit to the right of the port,
resting on log B, see figure 13g.
STEP 4:
Place log E with the thinner end resting on log 3.
STEP 1:
Remove both logs in kit LGS57. Both logs are identical.
Figure 13.
LGS57
Figure 13.b
Figure 12.c
Figure 12.d
Figure 13.f
Figure 13.g
Figure 13.h
Figure 13.e
LGS58
B
B
B
C
C
E
