background image

32

Appendix

xg0226 - 042220

Appendix B: Warranty continued

EXcLUSIONS TO WARRANTY

Corrosion or rust of any kind due to a lack of maintenance, 

inadequate combustion air or improper venting and corrosive 

chemicals/environments, expansion and contraction of metals or 

minor movements of components causing noise are not covered 

by this warranty.
willful misconduct (i.e. use of the appliance with problems 

known to the purchaser and causing further damages), including 

unauthorized or self-performed 'fixing' or exploration of the 

appliance's internal workings will void the warranty.

Appliances on which the serial number has been altered, defaced, 

removed or made illegible will void the warranty.

Costs incurred for diagnosis, service work, shipping and handling 

of defective or replacement parts are not covered under this 

warranty.

the published warranties are not applicable for any equipment 

manufactured by the companies that has been sold direct to 

the consumer via internet or auction websites. the companies 

do not endorse, approve or certify any online sale of its products 

through auction websites, online retailers or any other method 

of online sales direct to consumers.

INvESTIGATION OF cLAIMS AGAINST 

WARRANTY

the companies reserve the right to investigate any and all claims 

against this warranty and decide upon method of settlement.

the companies are not responsible for work done without 

written consent of the companies.

the companies shall in no event be responsible for any warranty 

work done without first obtaining the companies written 

consent.

the companies employees and dealers have no authority to 

make any warranties to neither alter this warranty nor authorize 

any remedies in addition to or inconsistent with those stated 

within this warranty.

IF WARRANTY SERvIcE IS NEEDED

To make a claim under this warranty, contact your installing 

dealer or contractor. the installing dealer is responsible for 

providing service and will contact the companies to initiate 

warranted parts replacements. in the event the installing dealer 

is unavailable, contact your nearest authorized Montigo dealer 

(www.Montigo.com) or contact Montigo direct at techsupport@

montigo.com. ensure you have your sales receipt and the model 

and serial number of your appliance.

DO NOT ATTEMPT TO DO ANY SERvIcE WORK YOURSELF

If you cannot locate the installing dealer, or nearest dealer/

distributor, you must notify The Companies in writing.

USA Offices

6955 Salashan Parkway
Ferndale WA, 98248

[email protected]

canadian Offices

27342 Gloucester Way

Langley, BC V4W 4A1

[email protected]

the terms and conditions of this warranty may be altered or 

amended from time to time without prior notice.

WARRANTy PERIOD: Warranty coverage begins on the date of 

original purchase. In the case of new construction, warranty 

coverage begins on the date of first occupancy of the dwelling 

or six months after the sale of the product by an independent, 

authorized Company dealer/ distributor, whichever occurs 

earlier.

Содержание DelRay DR3613LI-2



































Отзывы: