XG0222
38
Installation
LED Strip Installation
Figure 25.
Secure LED receiver
Figure 25.b
Secure LED plate
Figure 25.c
Power LED receiver
Figure 25.d
Insert glass plate
Figure 25.e
Insert burner
Figure 25.f
Insert media tray
Figure 25.g
Insert pilot cover/door/screen
LED Strip Instructions
Power to the unit
MUST
be disconnected before installing
For instructions on how to remove the door please see the
door install/removal section.
For instructions on how to remove the burner tray please
see the burner tray section.
4. Place Glass plate where metal plate sat before, secure using
existing metal brackets. Screw in halfway on one side first,
then fully on the other side, then fully tighten first side.
5. Reinstall burner strip.
6. Reinstall media tray.
7. Reinstall pilot cover and door/screen.
1. Secure LED receiver and AC adaptor to the bottom inside face
of the firebox with Velcro strips.
3. Connect LED strip to LED receiver, and power to AC adaptor.
2. Insert and secure LED plate.
