tem. Four amperages may be found; 15 ampere, 30 ampere,
50 ampere 125V and 50 ampere 125/250V.
A 15 ampere shore cord could be viewed as an extension cord
for the boat. Fifteen ampere systems usually supply one
device such as a battery charger, and have no AC control
panel or individual branch circuits.
The 30 and 50 ampere systems are equipped with an AC
control panel for power distribution to branch circuits.
All shore power systems require a special, marine grade three-con-
ductor cable to make a proper connection to the shore. Dockside
connections are plug-in while boat side connections plug-in and
are locked in position with a threaded locking collar to prevent acci-
dental disconnection and enhance water resistance. If the proper
receptacle is not available at dock side, there are special adapters
available to connect to 50 ampere systems. Consult your dealer for
information on proper adapters.
Some boats may be equipped with two separate 30 ampere electri-
cal systems (with separate AC Control Panels) or may use two
125V shore power cords to provide 250V service (in which case
the AC Control Panel will combine service automatically for large
appliances).
Plugs and receptacles for different systems are
designed in noninterchangeable configurations. A plug
from one system cannot fit into the receptacle of
another system. Never attempt to modify a shore
power cable; use only commercially available adapters
for system modification.
!
WARNING
!
SHORE POWER CORD
BOAT RECEPTACLE
THREADED LOCKING COLLAR
BOAT SIDE SHORE POWER CONNECTION
KC-2053
Notice
Some models may be equipped with extra batteries
and a DC to AC converter. The converter will allow
certain AC appliances, such as a refrigerator, to oper-
ate from battery power while underway. The operation
of battery conversion systems is not discussed in this
manual.
Since boats equipped with shore power usually remain in the water
for extended periods, corrosion is the primary cause of AC electri-
cal problems. Corroded connections can overheat plugs and recep-
tacles and is usually first noticed at the plug. If signs of overheating
is evident, repairs must be made immediately before further dam-
age is done.
Shore Power Connection
One or two 125 volt receptacles are provided for shore power inlet.
The type of receptacle determines the amperage rating of the sys-
SHIP SYSTEMS
11-5
Содержание 278 SC Sport Cruiser
