manualshive.com logo in svg

Monterey Boats 278 SC Sport Cruiser, Руководство пользователя

Поделиться
Скачать
Monterey Boats 278 SC Sport Cruiser Скачать руководство пользователя страница 112

Stopping

Twin-engine craft with counter-rotating engines operate with less
propeller torque induced drifting, using the concept of counterrota-
tion. One engine propeller turns clockwise while the other turns
counterclockwise. This helps maintain an even keel by eliminating
the tendency of your dual-powered boat to veer. 

Stopping (checking headway) is a technique that must be devel-
oped. Since a boat has no brakes, reverse thrust is used to slow and
stop the boat. The momentum of the boat will vary according to the
load as well as the speed. Make it a practice to slow to idle (no-
wake) speed before shifting into reverse.

Twin-Engine Maneuvering

One thing to keep in mind when
maneuvering with twin-engine
powered boats at low speeds, is
that turns are made by thrusts of
power from the engines and
propeller, not by turning the out-
drive unit; this means at lower
speeds, steering your boat
becomes a combination of pro-
peller direction, engine thrusts,
and steering wheel maneuvers. 

To make sharp and close quarter
turns, observe the following:

Before attempting to make close turns at low speed, bring the
throttles to idle so you can shift into reverse without damaging
the engine.

Reverse the direction of the engine on the side you want to turn.
For example, if you want to turn starboard, shift the star board
engine into reverse. The forward speed of the port engine, along
with the reverse rotation of the starboard engine, will pivot your
boat into a starboard turn.

Practice using the throttles to control the boat. You should try
these maneuvers in open water before attempting them near
docks or other boats. 

Use quick “bursts” of throttle to control the boat. Keep in mind
that once the boat starts to move, momentum will carry through.

It is best to learn maneuvering skills in open water away from traffic.
Adequate practice is the only way to develop your boating skills.

SALT WATER

If boat is moored in salt water for long periods, tilt the engine out of
the water (except during freezing temperatures). After removing the
boat from the water, lower the engine to the run (down) position until
the cooling system has drained thoroughly. Hose the entire hull down
with fresh water and wipe dry.

6

RUNNING

6-2

STARBOARD TURN

SLOWER PROP

PORT TURN

SLOWER PROP

KC-1074

TWIN ENGINE MANEUVERING

KC-2340

Содержание 278 SC Sport Cruiser






































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды