manualshive.com logo in svg

Monterey Boats 186MS, Руководство пользователя, Страница: 23 / 254

Поделиться
Скачать
Monterey Boats 186MS Скачать руководство пользователя страница 23

23

MONTEREY

  

BOATS

Safety Equipment

1.12  Caution & Warning Labels

The caution and warning labels shown are ex-
amples of the labels that could be on your boat.  
The actual labels and their location could vary on 
your boat.

Caution and warning labels must remain legible 
for the safety of you and your passengers. If a 
label becomes missing or damaged it must be 
replaced.  Immediately contact your dealer or 
Monterey Customer Service for a replacement.

CAUTION

TO AVOID INJURY, GLASS DOOR MUST 
BE SECURED IN A CLOSED AND LOCKED 
POSITION WHEN BOAT IS UNDERWAY. USE 
BOTH TURN LOCKS TO SECURE DOOR.

DANGER

CARBON MONOXIDE (CO) CAN CAUSE BRAIN 
DAMAGE OR DEATH.

E N G I N E   A N D   G E N E R ATO R     E X H AU S T 
CONTAINS ODORLESS AND COLORLESS 
MONOXIDE GAS.

CARBON MONOXIDE WILL BE AROUND THE 
BACK OF THE BOAT WHEN THE ENGINES OR 
GENERATORS ARE RUNNING.

MOVE TO FRESH AIR, IF YOU FEEL NAUSEA, 
HEADACHE, DIZZINESS, OR DROWSINESS.

WARNING

GASOLINE VAPORS CAN EXPLODE.  BEFORE 
STARTING ENGINE:

C H E C K   E N G I N E   C O M PA RT M E N T   F O R 
GASOLINE OR VAPORS.
OPERATE BLOWER FOR FOUR MINUTES.  RUN 
BLOWER BELOW CRUISING SPEED.

WARNING

CARBON MONOXIDE (CO) CAN CAUSE BRAIN 
DAMAGE OR DEATH.
E N G I N E   A N D   G E N E R AT O R   E X H AU S T 
CONTAINS ODORLESS AND COLORLESS 
CARBON MONOXIDE GAS.
SIGNS OF CARBON MONOXIDE POISONING 
I N C L U D E   N A U S E A ,   H E A D A C H E , 
DIZZINESS, DROWSINESS, AND LACK OF 
CONSCIOUSNESS. 
GET FRESH AIR IF ANYONE SHOWS SIGNS OF 
CARBON MONOXIDE POISONING.

SEE OWNER’S MANUAL FOR INFORMATION 
R E G A R D I N G   C A R B O N   M O N O X I D E 
POISONING.

WARNING

AVOID SERIOUS INJURY OR DEATH FROM 
FIRE OR EXPLOSION RESULTING FROM 
LEAKING FUEL.  INSPECT SYSTEM FOR LEAKS 
AT LEAST ONCE A YEAR.

WARNING

ROTATING PROPELLER MAY CAUSE SERIOUS 
INJURY OR DEATH.  

DO NOT APPROACH OR USE LADDER WHEN 
ENGINE IS RUNNING.

WARNING

FALLING OVERBOARD CAN CAUSE INJURY 
OR DEATH.  CLOSE THE TRANSOM GATE 
WHENEVER THE BOAT IS UNDERWAY.

WARNING

IN THE EVEN OF A FIRE:

TO KEEP FLAMES CONTAINED, DO NOT OPEN 
ENGINE BOX OR COMPARTMENT.

SHUT DOWN ENGINES, GENERATORS, AND 
BLOWERS.

C O N T I N U O U S LY   D I S C H A RG E   E N T I R E 
CONTENTS OF PORTABLE FIRE EXTINGUISHER 
THROUGH FIRE PORT IMMEDIATELY.

DANGER

IN THE EVENT OF FIRE, DO NOT OPEN 
ENGINE HATCH.  IMMEDIATELY SHUT DOWN 
ENGINE, GENERATOR, AND BLOWERS,  
DISCHARGE ENTIRE CONTENTS OF FIRE 
EXTINGUISHER THROUGH THE FIRE PORT.  
AVOID INHALATION OF TOXIC FUMES.  

VENTILATE SPACE BEFORE ENTERING.

WARNING

VISIBILITY FROM THE SEATED POSITION 
AT   T H I S   H E L M   S TAT I O N   I S   L I M I T E D.  
AVOID SERIOUS INJURY OR DEATH FROM 
COLLISIONS.  OPERATION FROM A STANDING 
POSITION MAY BE NECESSARY TO MAINTAIN 
A   LO O KO U T   A S   R E Q U I R E D   B Y   U S C G 
NAVIGATION RULES AND COLREG.

WARNING

ROTATING PROPELLER MAY CAUSE SERIOUS 
INJURY OR DEATH.   SHUT OFF ENGINE WHEN 
NEAR PERSONS IN THE WATER.

DANGER

CARBON MONOXIDE (CO) CAN CAUSE BRAIN 
DAMAGE OR DEATH.

E N G I N E   A N D   G E N E R ATO R     E X H AU S T 
CONTAINS ODORLESS AND COLORLESS 
MONOXIDE GAS.

CARBON MONOXIDE WILL BE AROUND THE 
BACK OF THE BOAT WHEN THE ENGINES OR 
GENERATORS ARE RUNNING.

MOVE TO FRESH AIR, IF YOU FEEL NAUSEA, 
HEADACHE, DIZZINESS, OR DROWSINESS.

Содержание 186MS































































































































































































































































Отзывы:

Нет отзывов