Place face plate over battery compartment and
buttons. Place remote over 2 pins on front
cover. Attach cover of remote by placing over 4
pins and snaping into place.
Install wall control unit to outlet box
using machine screws provided.
49
Attach front cover to wall control
with screws provided. Snap battery
cover in place.
50
48
HAND HELD INSTALL
WALL MOUNT INSTALL
Remove cover by snaping off from top or bot-
tom. Remove battery cover. Install 12V battery
into wall remote. Duracell MN21 / Eveready A23
/ GP 23A all 12V.Attach cover of remote by plac-
ing over buttons and snap the battery cover in
place.
47
46
Refer back to
step 22 for
blade and light
kit installation.
Tighten all screws.
45
Install by placing over screws and
twisting.Reinstall screw taken out
from step 28.
44
Lift motor aligning studs mounting
plate with holes on motor bracket.
Re-install nuts and tighten.
43
