© 2011 Monte Carlo Fan Company
1/16/2012
6
Attach glass by locating dimples in
light fixture with the groves in glass
and twisting clockwise till tight.
30
Tighen screws securely. Repeat this
process 4 more times until all blades are
assembled.
28
install 1 x 100 watt halogen bulb with socket
type E-11. Do not touch bulb surface as oily
residue from skin can cause the bulb to ex-
plode.
WARNING: Over lamping the fan will
result in the fan lights shutting down
until the proper wattage of bulbs are
installed. Reset the lights by turning off
the wall switch, breaker,or by remote. Re-
place bulbs with the correct wattage bulbs,
turn the power on.
29
Remove cover by snaping off from top or bot-
tom. Remove battery cover. Install 12V battery
into wall remote. Duracell MN21 / Eveready A23
/ GP 23A all 12V.Attach cover of remote by plac-
ing over buttons and snap the battery cover in
place.
Place face plate over battery compartment and
buttons. Place remote over 2 pins on front
cover. Attach cover of remote by placing over 4
pins and snaping into place.
Install wall control unit to outlet box
using machine screws provided.
33
Attach front cover to wall control
with screws provided. Snap battery
cover in place.
34
32
31
HAND HELD INSTALL
WALL MOUNT INSTALL
