© 2011 Monte Carlo Fan Company
1/16/2012
3
Before you begin installing the fan, Switch
power off at Service panel and lock service dis-
connecting means to prevent power from being
switched on accidentally. When the service dis-
connecting means cannot be locked, securely
fasten a prominent warning device, such as a
tag, to the service panel.
Before installing this fan make sure the outlet box is
properly installed to the house structure. To reduce
the risk of fire, electric shock, or personal injury,
mount to outlet box or supporting system acceptable
for fan support. (Mounting must support at least 35
lbs.)
Use metal outlet box suitable for fan support
(must support 35 lbs). Before attaching fan to
outlet box, ensure the outlet box is securley fas-
tened by at least two points to a structural ceiling
member ( a loose box will cause the fan to wab-
ble).
Use only the screws provided with the
outlet box.
Place canopy, canopy disk, yoke on down-
rod as in photo. Then thread leadwires
and safety cable through the downrod in
direction of arrow.
3
2
1
6
Remove keeper from pin. Put
keeper back in pin and save for
later.
4
Loosen the 2 set screws in yoke
for downrod to slip into yoke.
5
Insert downrod into yoke on top of the Fan
Body.
Align the hole in the Downrod with the hole in
the Yoke. Insert the Pin through the Yoke and
Downrod until the point appears on the other
side. Install the Keeper Pin
7
8
Yoke
Cross Pin
Keeper
Pin
Tighten the 2 Set screws on the Yoke
once the downrod is in place.
9
