56
Go to step 14 to
finish installation.
Lift canopy allowing the 2 studs
to protrude through the canopy
and install knurled nuts as shown.
Tighten the knurled nuts securely.
55
Make wire connections to the power source using wire
nuts provided. Make sure that no filiments are outside
of the wirenut. After making the wire connections, the
wires should be spread apart with the grounded con-
ductor and the equipment-grounding conductor on one
side of the outlet box and ungrounded conductor on
the other side of the outlet box. Spliced wires should
be turned upward and pushed carefully up into the
outlet box.
54
