Install finial nut by threading pull
chain through hole in finial nut.
Hand tighten finial nut securely.
32
Remove the plastic insert from each
side of canopy.
35
Thread leadwires and safety cable
through canopy.
37
Remove every other screw and save
for future use.
36
Replace the 3 screws removed and
tighten securely.
Go to step 15 to
18 for wiring.
38
Install the other 2 screws and tighten
all 4 screws securely.
40
Lift canopy up aligning the “L” shape
holes with the screws on the mount-
ing bracket. Turn canopy clockwise to
hold in position.
39
Place glass on fitter by threading pull
chains through glass , glass finial
cap, and knurled nut. Hand tighten
knurled nut securely.
31
Remove the 2 studs from mounting
bracket.
33
FFlluusshh M
Moouunntt IInnssttaallllaattiioonn
Then go to steps
22 to 32 to fin-
ish assembly of
fan.
41
Take 4 screws from hardware pack
and insert 2 one on each side of
bracket to match the L slot screw
holes in canopy. Keep 2 screws for
later use.
34
