Install the 2 thumb nuts to the studs
and finger tighen.
21
Lift canopy ring up aligning with the
studs from mounting bracket.
20
Check motor for shipping stabilizers
and remove if present.
24
Install blade arm to reversed
side of blade. Tighten 3 screws
securely. Repeat for all 4 blades.
23
Install medallion to one side of the
blade. It is suggested to use different
finishes for medallion and blade so
they will not be the same finish.
22
Attach blade assembly to the motor
and tighen screws securely.
25
Remove finial nut, knurled nut, and
glass finial cap from the fitter.
27
Remove 3 screws from switch cap
cover. Save the screws for future
use.
26
Connect plug from fan to plug from
light fixture.
28
Install 3 x 40 watt candelabra
bulbs. Bulbs not included.
30
Install switch cap with fitter onto
fan using 3 screws removed and
tighten securely.
29
Lift canopy up aligning with the
studs from mounting bracket.
19
