Elettronica Montarbo
srl
via G. di Vittorio 13 | 40057 Cadriano Granarolo Emilia (BO) ITALY
t
+39 051 6047711
F
+39 051 765226
@
www.
fiveo.it
Company under the control of EKO Music Group SpA
The information contained in this manual have been carefully drawn up and checked. However no responsibility will be assumed for any incorrectness. This manual cannot
cover all the possible contingencies which may arise during the product installation and use. Should further information be desired, please contact us or our local distributor.
Elettronica Montarbo srl can not be considered responsible for damages which may be caused to people and things when using this product. Specifications and features are
subject to change without prior notice.
The product is made in China under license of Elettronica Montarbo srl.
The product is compliant with the EU legislation.
TECHNiCA L SPECiFiCATiONS
Inputs
Unbalanced 6.35mm (¼”) Jacks +
Parallel Link
Input Impedance
50 kΩ
Outputs
Balanced XLR-M
Output impedance
600 Ω
Frequency range
10 Hz ÷ 40 kHz ± 3 dB
Controls
PAD switch sensitivity:
0 dB / -20 dB / -40 dB
GROUND switch: GND/LIFT
Dimensions (W × D × H)
133 × 114 × 54 mm
(5.2” × 4.5” × 2.1”)
[1]
ATTENUATION PAD
- It allows connection to a wide range of input signal levels,
just selecting just selecting -20 dB or -40 dB attenuation.
[2]
INPUT 50K
- Connect the instrument to be balanced to this 6.35 mm (¼”)
unbalanced T/S connector.
[3]
PARA OUT 50K
: These 6.35 mm (¼”) unbalanced connectors are wired in parallel
with the inputs. Use them to connect the signal to your on-stage amplifier.
CONNECTiONS
DESCRiPTiON
STAGE 2.2
2CH Passive DI box
INPUT
50K
INPUT
50K
0dB -20dB -40dB
0dB -20dB -40dB
PARA OUT
50K
PARA OUT
50K
1
2
GROUND
BALANCED
IN/OUT 600
Ω
BALANCED
IN/OUT 600
Ω
ON
GROUND
ON
1
2
FRONT PANEL
REAR PANEL
STAGE 2.2
2CH Passive DI box
INPUT
50K
INPUT
50K
0dB -20dB -40dB
0dB -20dB -40dB
PARA OUT
50K
PARA OUT
50K
1
2
GROUND
BALANCED
IN/OUT 600
Ω
BALANCED
IN/OUT 600
Ω
ON
GROUND
ON
1
2
[4]
GROUND
: Use it to reduce unwanted “hum” or “buzz” noise caused by ground
loops.
[5]
BALANCED IN/OUT
: Connect these Balanced XLR connectors to an XLR input
on your mixer/stagebox/wallbox.
1
1
2
3
5
4
©2015 Elettronica Montarbo srl | Stampato in Cina
STAGE 2.2
2CH Passive DI box
INPUT
50K
INPUT
50K
0dB -20dB -40dB
0dB -20dB -40dB
PARA OUT
50K
PARA OUT
50K
1
2
GROUND
BALANCED
IN/OUT 600
Ω
BALANCED
IN/OUT 600
Ω
ON
GROUND
ON
1
2
STAGE 2.2
2CH Passive DI box
INPUT
50K
INPUT
50K
0dB -20dB -40dB
0dB -20dB -40dB
PARA OUT
50K
PARA OUT
50K
1
2
GROUND
BALANCED
IN/OUT 600
Ω
BALANCED
IN/OUT 600
Ω
ON
GROUND
ON
1
2
