Montarbo EARTH 218, Руководство пользователя

Страница: 33 / 60

Earth218 | owner’s manual
33
AC MAINS CONNECTION
• Make sure the mains power switch is off ('0').
• Check that mains voltage corresponds to the voltage indicated on the
panel.
• Use only the factory supplied mains cable or, if a different plug style is
needed, a suitable cable with a ground connection and marked with the
safety approvals valid in the country of use.
• Leave enough room to get to the mains power socket and the mains
connector on the back panel. as long as it is plugged in there can be
dangerous electrical potentials inside the device, even when the mains
switch is in the '0' (off) position and the maintenance work etc., always
make sure it has been unplugged from the mains socket.
CAVO DI ALIMENTAZIONE
use the cable supplied with the system. if another cable is needed,
always use a cable with specifications suitable to the value of the current
involved, considering the current drain of the system and, just in case,
the current drain of the devices powered by the aC looP out socket.
CAUTION
The AC LINE IN socket is rated for a 20A maximum current.
This means that the maximum current that may be sourced from
the AC LOOP OUT socket (2) is 6A (20A: max current rating of
powerCON
®
, -14A = maximum current drained by Earth218 system).
the maximum current drain of the sum of the devices powered by the
cable connected to the socket 1 (that means the current drain of the
mol1818a system plus the maximum current drain of all the other
devices powered by the aC looP out socket) must be lower than 20a.
the aC socket that powers connector (1), the mating plug and the
cable must be suitable for this current value. When in doubt, always
recruit the assistance of a qualified technician.
We suggest the use of a 3-conductor cable, with a 3 x 1,0 mm2
minimum copper section (gauge), suitable for the intended application
and environment and complying with all the relevant safety regulations.
the cable and the plug must be marked with the applicable, country
specific safety approvals, and the plug must be certified for the actual
current value.
refer to the following paragraph for details about wiring of the
powerCon
® connector.
important