Montanari RQ 200, Руководство пользователя

Страница: 8 / 36

44
2. SAFETY
2.1 Intended use
The speed governor is produced in compliance with the state of the art for safe
and reliable use. It is forbidden to tamper with devices or functions designed to
prevent accidental contact.
It is prohibited to use the safety limiter for activities other than the one
for which it was produced and the conditions set out in the supply con-
tract.
!
No liability is accepted for any malfunction due to installation not confor-
ming to specifications, except in cases approved by Montanari Giulio & C.
2.2 User’s obligations
The responsibility for instructions lies with the company in charge of the work.
The operator must ensure that all persons involved in installation, operation,
maintenance and repair have read and understood the supplied operating in-
structions and have adapted to them in order to:
• Avoid damage to property or persons.
• Ensure safe and reliable operation of the unit.
• Avoid breakage and environmental damage due to misuse.
Immediate voidance of the guarantee in case of:
• Use of components other than those installed.
• Any modification to the governor.
• Destruction of the lead seal, removal of commissioning adhesive labels or of
the anti-tampering paint.
• Wrong maintenance or wrong inspection checks.
!
Before installing on the system check that:
• Data plate details and lift speed correspond to those of the system.
• The diameter of the rope is suitable to the governor/tension device pulley.
IMPORTANT:
Safety devices require a special attention:
• Test their operation immediately after installation.
• It is forbidden to dismantle a safety device during maintenance or repair if
the intervention involves parts that may affect the settings set at the factory
(lead sealing, seals, etc., see also warranty voidance).
! !
See detail in paragraph 2.2