Monster Vision MAX 3D, Руководство пользователя

Страница: 28 / 32

26
5.5 ADjUStiNG LENS DUty CyCLE
Duty cycle is the amount of time the lenses remain open to view images. Change in duty cycles
appear in the form of brightness and ghosting of the image.
Press Joystick Left
• Lens Closes More
• Brightness Decreases
• Ghosting May Decreases
• Number of ORANGE illuminated LEDs
decreases as well their brightness
Press Joystick Right
• Lens Opens More
• Brightness Increases
UP
DOWN
PRESS
RIGHT LEFT PRESS
• Ghosting May Increase
• Number of ORANGE illuminated LEDs
increases as well their brightness
5.6 ADjUStiNG POLARity
Polarity is an important setting for optimum performance of the 3D image, when polarity is reversed
while perfectly clear and free of ghosting, can look flat and have no depth in the image. This is due
to the left lens being open when the right eyes image is displayed and visa-versa. Proper polarity
is important to displaying to a 3D image that is as deep as possible.
To check for proper polarity, simply flip the eyewear over, if the image appears deeper, the polarity
is reversed.
Reversal of polarity can be caused by the source equipment, the content, or the 3D TV. Before
changing the polarity of the eyewear, try changing the polarity on the source equipment or the
3D TV (refer to the components owner’s manual). Should the components not have a way to reverse
polarity or if the condition does not change, it can be adjusted in the transmitter.
1. Select Fine Tuning Mode in the Transmitter
2. Press & Release into transmitter
a. If polarity changes to Standard, 2 LEDs will be illuminated RED
b. If polarity changes to Reversed, 3 LEDs will be illuminated RED
3. View the image with the eyewear to observe if standard polarity returns. Repeat until standard
polarity returns and the image has an acceptable 3D depth
View the image with the eyewear to observe if standard polarity returns. Repeat until standard
polarity returns and the image has an acceptable 3D depth. After 120 seconds the LEDs will turn
off, this indicates that the polarity is set and the eyewear returns to normal operating mode.